FIELD METHOD / SITE PHOTOGRAPHS / V0.5

Photo Map to Google Earth

Add photographs or a ZIP. Review the locations, place any photo that has none, and add captions. Download a Google Earth KMZ, CAD files for Civil 3D and MicroStation, cameras for Blender, or a key view package for Illustrator and InDesign. No site model required.

Site from Site Lens

In Site Lens, open Export and choose Send this site to Photo tools to bring a loaded site here: its coordinate frame, its 3D model and a copy of the photographs kept in the project, for placing cameras and matching photographs against the model. It works on the same device and browser only.

1. Choose your photographs

Choose several files at once, or drop them anywhere on this page. Each choice adds to the list below; a photograph already listed is skipped.

JPEG, PNG or WebP. Up to 200 photographs and 1 GB on this page, 32 MB per photo. Photographs from ZIPs count up to 160 MB in all, and one ZIP holds up to 100 photos. Files are processed locally and never uploaded. This page does not save your session; keep your original files. A site sent from Site Lens is kept in this browser with the photo work done on it, until you remove that site.

GPS and supported files

JPEG GPS is read when available. A photo without a location is listed but left out of the map until you type its latitude and longitude under Review. Locations are never guessed.

For many photos, include filename-matched CSV or GeoJSON points inside a ZIP, using the point format in the CSV template below. Points apply only to photos in the same ZIP.

Download longitude / latitude CSV template

CSV columns: filename, longitude, latitude. Match the photo’s path inside the ZIP. Coordinates are decimal degrees. Check the source and accuracy before sharing.

iPhone HEIC photos cannot be read. On the iPhone choose Settings › Camera › Formats › Most Compatible, or export the photo as JPEG with location included.

Choose photographs or a ZIP to begin.

2. Review locations and captions

Untick a photo to leave it out. A caption becomes the pin’s title in Google Earth. A location you type is listed in the pop-up as placed by hand.

No photographs yet.

    Shows the ticked photos as numbered pins on a USDA NAIP aerial photograph. Only the rectangle around them, which shows where they were taken, is sent, to USGS (or USDA if USGS does not answer); the photographs stay on this device. With a State Plane zone chosen under Download, the pins are drawn in that zone, as the CAD download places them. Outside the United States, or with UTM chosen, no aerial is offered and nothing is sent.

    3. Download

    Full size uses the unchanged originals, which keep their embedded metadata, including GPS. Phones store many photos sideways or upside down with a tag saying which way is up, and Google Earth can ignore that tag, so at full size the Google Earth and Blender downloads hold those photos as full-size upright copies without embedded metadata; the CAD download keeps the originals. Reduced copies are smaller, upright and carry no embedded metadata, in every download. A download larger than about 150 MB is split into parts; your browser may ask to allow several files.

    Google Earth

    The KMZ includes the photographs, clickable camera icons and photo popups fitted within 600 × 800 pixels, with each caption, date, coordinates and location source. Google Earth controls the outer popup size. Pins are clamped to the ground; this is a photo map, not a solved camera projection.

    The KML alone has the pins, captions and details but no pictures and no camera icon. Its pictures show only beside the photos folder unzipped from a single KMZ made with the same photos ticked and the same photograph choice. Use the KMZ to share the photographs.

    Civil 3D, MicroStation and Blender

    Photo locations in California State Plane (NAD83, US survey feet), or in WGS 84 / UTM (metres) anywhere else. In the United States, choose the zone your drawings use, or Automatic (UTM) outside California. Elsewhere the UTM zone of your photographs is chosen for you. UTM has been checked against reference conversions, not yet with real photographs taken outside California.

    With the underlay, the Blender download adds the ground around the photos from USGS 3DEP with the USDA NAIP aerial on it, and sets each camera at the ground under its photo plus the eye height. Only the rectangle around the photos, which shows where they were taken, is sent: to USGS (or USDA for the aerial if USGS does not answer). The photos spread over at most about 4,000 ft. It needs Landscape Camera Setup 0.5.1.

    What is in these downloads

    CAD: a DXF (AutoCAD R12) with a point, a circle, a number-and-caption label and, where the direction is known against true north (recorded by the phone or typed by hand) or grid north (a Site Lens GIS point), an arrow showing which way the camera faced, turned to grid north. A Civil 3D point file in PNEZD (comma delimited) format. A CSV with every field, including latitude and longitude. The photographs, named by point number.

    Blender: the photographs and camera records for Landscape Camera Setup 0.5.1. Cameras sit in the same State Plane coordinates as the DXF, shifted to an origin near the photographs; README.txt gives the shift so a model from Civil 3D or MicroStation lines up. Each photograph is a camera background to match against your model. With the underlay, terrain-underlay.glb holds the ground and the aerial in the same coordinates, imported with the cameras; it is ground only, so roofs and tree crowns lie flat on it. Camera heights are computed, not measured. The Blender download needs a California zone in US survey feet for now: Landscape Camera Setup 0.5.1 reads no other system.

    Accuracy: positions are where the phone said it was, typically within 5–10 m, and phone compass directions are often off by 10–20 degrees. Phone GPS is treated as NAD83 without a datum shift (about 1–2 m in California). In UTM it is projected on WGS 84, with no shift to a national datum. This is not survey data.

    Key view package for Illustrator and InDesign

    A key view map with a numbered pin for each ticked photo and a view wedge where the photo records a direction, and a page for each photo, held within 6 × 4 in (4 × 6 in when upright), with its number and caption below. A PDF of the map and the photo pages downloads beside a ZIP holding the map as an SVG for Illustrator, a script that turns its parts into layers, and a Data Merge spreadsheet with the photos for InDesign (UTF-8; InDesign 22.0 or later keeps accented letters and symbols). Your browser may ask to allow several files.

    Numbers follow the first point number above, and the map follows the zone when one is chosen; without a zone it is north up. The map's aerial is loaded at print resolution for the area Show on aerial covers: only that rectangle is sent, to USGS (or USDA if USGS does not answer). Outside the United States, or with UTM chosen, no aerial is requested and the map has a plain ground. The scale bar is in metres when the units are metres. The photos are reduced upright copies, longest side 2400 px, without embedded GPS.