ResearchClimate ResilienceClimate Risk Assessment Tools

Climate risk screening tools for site design

Public tools for screening a US site for heat, flood, drought and sea-level rise: what each measures, its scale, and how to record the reading.

Field Method · AI-assisted research roundupPublished Sources checked

Public tools can screen a site for heat, flood, drought and sea-level rise in an afternoon. Each tool answers a different question at a different scale, and the result is screening, not site assessment. Most tools report at the county, census tract, forecast zone or tide gauge. The flood and sea level maps can be read at a site, within the limits of their elevation data, but they show a mapped condition and not how the site behaves. Record which question each tool answers and the assumption you took from it.

Sources were read on November 14, 2026. This is not engineering, legal or safety advice, and requirements and map editions vary by jurisdiction. Examples come from California and San Diego. Site-scale responses to these hazards are discussed in Site-scale landscape strategies for heat, flood, stormwater and drought and are not repeated here.

Three kinds of tool

  1. Hazard maps. They show where a hazard is mapped, or where water would reach at a level you choose: the FEMA flood layer, the NOAA Sea Level Rise Viewer.
  2. Scenario tables. They give numbers for a region or gauge under stated futures: NOAA sea level scenarios, Cal-Adapt, the Climate Explorer. They do not map your site.
  3. Composite scores. They rank places against each other: the FEMA National Risk Index. They make no prediction for any place.

Composite score: FEMA National Risk Index

The National Risk Index dataset (December 2025, v1.20) covers 18 natural hazards, including coastal flooding, drought, heat wave, inland flooding and wildfire, for every US county and census tract. FEMA’s Resilience Analysis and Planning Tool serves it as a map.

It measures expected annual loss: exposure (buildings, population, agriculture) multiplied by annual hazard frequency and a historic loss ratio, per the methodology overview. That loss is scaled by social vulnerability and community resilience to give the Risk Index. Scores are percentile ranks with no probability or depth attached. The FAQ says a county’s score is relative to all other US counties, and a tract’s to all other US tracts.

Three details from the methodology matter to a designer.

  • Heat wave frequency comes from 18 years of National Weather Service alerts, on areas the size and shape of NWS forecast zones and counties.
  • Drought loss counts crop-only agricultural value, with frequency from 22 years of the U.S. Drought Monitor. Our reading: a tract with no farmland carries almost no drought loss in this index, however dry the site is.
  • Coastal flooding uses FEMA’s flood layer and NOAA high tide flooding probability; wildfire uses a U.S. Forest Service burn probability model.

The FAQ says national data are often less accurate than local data and suggests deferring to local data. The methodology and FAQ draw frequencies from past records and models of present conditions, and we found no mention of climate projections in them. GAO reports that FEMA’s technical documentation says the tool “cannot be used to predict future outcomes” (GAO-26-107894, September 2026). The FAQ also says v1.20 changed the social vulnerability and community resilience metrics. Our reading: treat the index as a present-day baseline, and do not assume v1.20 scores compare directly with earlier versions.

How to record it: version, date, geography (tract or county), hazard, rating, and “relative ranking, not site-specific.” A tract’s score describes the tract, so do not quote it as a site’s risk.

Flood mapping: the FEMA National Flood Hazard Layer

The National Flood Hazard Layer holds current effective flood hazard data for the National Flood Insurance Program. It is updated continuously and covers over 90 percent of the US population. Pending and preliminary data are published separately and do not set program requirements until they take effect. Where an effective map exists, its data must be used for minimum program requirements. The Flood Map Service Center is the official public source for flood hazard information and warns that downloaded information may later be superseded.

FEMA defines the base flood elevation as the elevation shown on the map for Zones AE, AH, A1–A30, V1–V30, VE and the AR zones, of a flood with a 1 percent chance of being equalled or exceeded in any year. The elevation a project designs to is set locally. FEMA’s freeboard definition describes added height above the base flood elevation under state or community floodplain regulations, and says the NFIP does not require freeboard but encourages communities to adopt at least one foot.

Our reading: the layer tells you whether a site is mapped, in what zone, and with what base flood elevation where one is shown. It gives no drainage analysis, no view of future conditions and no local design elevation. Record the effective date or panel, the zone, any base flood elevation with its datum, and whether pending data exist. Ask the local floodplain administrator and the project engineer for the design elevation.

Rainfall design values come from the NOAA Precipitation Frequency Data Server, which gives NOAA Atlas 14 estimates and confidence intervals for a chosen point (page last modified August 4, 2025). NOAA’s Atlas 15 page says Atlas 15 will supersede Atlas 14 as the national standard, that its Volume 2 will give estimates projected into the future, and that Atlas 15 will account for future trends through 2100. It says the Atlas 14 Volume 12 study (Montana, Idaho and Wyoming) “assumes stationarity”, meaning its statistics do not change over time. We did not check the volume that covers California. Published contiguous-US estimates are due no earlier than September 2027. Ask the project engineer which edition governs.

Sea level: NOAA scenarios, NOAA viewer and California guidance

The NOAA Sea Level Rise Viewer maps where water would reach at a water level you set with a slider. It does not say which level will occur or when. A confidence layer shows blue for high confidence of inundation, orange for high uncertainty, and no shading for high confidence of staying dry. The viewer leaves out erosion, subsidence, future construction and wind-driven tides. It says canals, ditches and stormwater infrastructure may be mapped inaccurately and features should be verified on site.

Its scenarios come from the 2022 NOAA technical report (Sweet and others, February 2022): five scenarios by decade to 2150, on a 1-degree coastal grid and downscaled at NOAA tide gauges in accompanying datasets. Three statements limit its use.

  • Its intent is not “authoritative guidance or design specifications for a specific project.”
  • Relative sea level along the contiguous coast is expected to rise 0.25 to 0.30 m from 2020 to 2050, about as much as in the previous 100 years.
  • The projections omit year-to-year variability such as El Niño.

The Application Guide says the scenarios diverge mostly after 2050, separates near-term (before 2050) from long-term planning, and offers no formal regulatory or engineering guidance.

For California, the Coastal Commission cites the Ocean Protection Council’s 2024 guidance for a range of 1 to 6.6 feet (0.3 to 2.0 meters) by 2100. The Commission adopted its guidance update on November 13, 2024, with new tables of anticipated sea level rise and scenarios for 14 tide gauges. We could not open the chapters or the state guidance, so we say nothing about what either asks of a project.

How to record it: scenario and year, with the reason for each; baseline year (the NOAA tables use 2000); gauge or region; datum and tidal epoch; any offset or conversion applied; the viewer’s water level setting exactly as labelled, with its reference level and units; the tool’s update date and listed exclusions.

Worked reading: San Diego scenarios against gauge flood heights

This is our arithmetic on published tables. We did not run the viewer on a parcel.

Facts from the NOAA report.

  • Southwest region medians relative to 2000, for Low, Intermediate-Low, Intermediate, Intermediate-High and High: 0.15, 0.20, 0.24, 0.31 and 0.38 m in 2050 (Table 2.2); 0.3, 0.5, 1.0, 1.5 and 2.0 m in 2100 (Table 2.5). The 2050 observation-based extrapolation, 0.24 m, matches Intermediate.
  • The San Diego gauge (NOAA station 9410170) has high tide flood heights of 0.570 m (minor), 0.852 m (moderate) and 1.240 m (major) above mean higher high water (MHHW) on the 1983–2001 tidal epoch (Table A1.3). The report treats that MHHW as fixed.
  • The current tidal epoch has a 1992 baseline, and the report says comparing its 2000-baseline projections with values tied to that epoch needs an adjustment between 1992 and 2000. Its Table A1.2 gives 0.01 m for the Southwest.
  • Gauge-level scenario values sit in the accompanying datasets. The PDF tables print regional values only, and we did not open the datasets, so we use the regional median. A gauge value includes local land motion and should replace it in a real reading.

Our arithmetic and interpretation. Adding the 0.01 m offset puts each scenario on the gauge’s 1992 baseline.

Scenario 2050 (m) 2100 (m) 2100 against San Diego flood heights
Low 0.16 0.31 below minor (0.570)
Intermediate-Low 0.21 0.51 below minor
Intermediate 0.25 1.01 above moderate (0.852), below major (1.240)
Intermediate-High 0.32 1.51 above major
High 0.39 2.01 above major

On these numbers, no scenario lifts today’s MHHW to the minor flood height by 2050. By 2100 an Intermediate rise would put today’s MHHW above today’s moderate flood height at the gauge. The offset changes no result here.

The comparison is rough. The flood heights are already set above MHHW, so the daily tide needs no separate step. It leaves out the gauge-specific projection and its land motion; storms, waves and El Niño years; and how often a height is exceeded, which the report treats separately through extreme water level probabilities. It gives no site elevation. The report notes that its MHHW-referenced maps need converting to land-based heights such as NAVD88 to be useful for decisions. If the site survey is on NAVD88, ask the surveyor to make and state that conversion before comparing any site elevation.

Planning horizon. Choose the year from the design life of what is built, and the scenario from how much flooding it can tolerate. The Application Guide calls this a risk tolerance approach: a critical, long-lived asset that is hard to adapt would likely get a low risk tolerance and a focus on Intermediate-High or High. A project with a short life that is easy to move or adapt may use the scenarios most likely to occur, Low to Intermediate. Our reading: much landscape work falls before 2050, where the five Southwest scenarios sit within 0.23 m of each other. The wide spread in the table is a 2100 spread.

For a California coastal site, the state’s 2024 guidance may be the reference the reviewing agency expects. We did not read its tables or what it asks of applicants. Check with the agency and the coastal engineer before using any NOAA value in a submittal. This reading is a prompt for those questions, not a finding about any site.

Climate projections: Cal-Adapt and the Climate Explorer

Cal-Adapt is California’s climate data platform, with funding and advisory oversight from the California Energy Commission. It says it is built on 5th Assessment climate data. Its model documentation says the downscaled simulations were made for California’s Fifth Climate Change Assessment, in two datasets:

  • WRF (UCLA, dynamical downscaling): 8 models, at 45 km, 9 km and 3 km.
  • LOCA2-Hybrid (Scripps, hybrid-statistical downscaling): 15 models, at 3 km.

The documentation says models vary by sub-region and users should check credibility themselves. Model errors are largest in arid regions and in the dry, hot season. The downscaled data should not be used for wildfire modeling. It describes a humidity bias and says the heat index calculation is relatively insensitive to a 4 percent humidity offset. A 3 km cell, about nine square kilometres, cannot see a parking lot, tree canopy or north-facing slope. Our reading: Cal-Adapt shows how a region’s climate may shift. It cannot show how hot a particular plaza gets.

Climate Explorer (U.S. Climate Resilience Toolkit) shows past and projected climate for every US county from 1950 through 2100, from CMIP5 models downscaled with LOCA. It names no version or date. We could not read its About and FAQ pages, so we do not describe its scenarios.

How to record either: dataset, model set, model generation and scenario family as the tool names them, variable, time window and geography averaged. Scenario names may differ between the two. Name the range across models and scenarios rather than one number.

Heat and drought

Three federal products give heat or drought information. None predicts site conditions.

  • Heat index. It combines air temperature and relative humidity, assuming shade and light wind; full sun can raise it by up to 15°F. Our reading: for a plaza or playground in full sun, the published value can understate exposure.
  • HeatRisk. An experimental NWS forecast in categories 0 to 4, up to seven days ahead, supplementing official warnings. The page states no resolution. It forecasts heat impact for people and is not a climate projection.
  • U.S. Drought Monitor. A weekly Thursday map with categories D0 to D4, made by experts combining precipitation, soil moisture, streamflow and impact reports. The page describes regional-scale conditions judged by experts. A D2 on the map does not set a site’s irrigation demand.

Record the date and time of each reading; each is a snapshot or short forecast. Assumptions about future heat belong with a projection source.

Wildfire: a pointer only

CAL FIRE’s Office of the State Fire Marshal publishes California’s Fire Hazard Severity Zones. The page says the State Fire Marshal is mandated to classify lands in State Responsibility Areas into Moderate, High or Very High zones, and cites Public Resources Code 4201-4204, 14 CCR 1280 and Government Code 51175-89. It links separate maps for State and Local Responsibility Areas, and says the maps evaluate “hazard,” not “risk”. On November 14, 2026 it announced a public comment period for the 2026 State Responsibility Area map update.

This article gives no wildfire design guidance and does not describe what follows from a zone. Record the map, its responsibility area and edition, and go to the State Fire Marshal and the local fire authority for any rules.

San Diego context

The City of San Diego’s Climate Resilient SD is its climate adaptation plan. The adoption release dates the City Council vote to December 14, 2021, and names extreme heat, wildfires, sea level rise, and flooding and drought as the primary hazards. The plan page lists a Sea Level Rise Vulnerability Assessment and a separate State Lands Sea Level Rise Vulnerability Assessment. The State Lands assessment considers the recommendations of the Ocean Protection Council and Coastal Commission guidance, for 2030, 2050 and 2100. We did not read either. Our reading: a project in the city should check them for the scenarios the city used, and explain any departure.

What a record of the screen should contain

For each hazard, so a reviewer can repeat the reading, write:

  1. The question asked (current mapped hazard, relative ranking, future scenario).
  2. The tool, its version or edition, and the date read.
  3. The geography reported: tract, county, forecast zone, gauge, grid cell.
  4. The value or category as the tool gives it, with units, datum, baseline year and tidal epoch.
  5. Any datum offset or conversion applied, and who made it. A conversion of site elevations between NAVD88 and MHHW should be made and stated by the surveyor.
  6. What the tool says it omits.
  7. The planning horizon and scenario adopted for design, the reason for each, who decided, and what would change the decision.
  8. The next step: survey, engineer, agency review.

What we could not settle

  • What the 2024 Coastal Commission guidance and the Ocean Protection Council guidance ask of a project; we read only the Commission’s summary pages.
  • The San Diego gauge scenario values, and whether the Atlas 14 volume for California is described as stationary.
  • The resolution of HeatRisk, and the variables and resolution behind Climate Explorer’s county outputs.
  • The status of EJScreen and CEJST. The federal addresses we tried did not resolve on November 14, 2026, and we rely on neither. Check for current versions before using any score that cites them.
  • Which screening reading a given jurisdiction accepts.

Using this in Field Method

Site Dossier assembles public site data for a point in San Diego County, including NOAA climate normals and a fire hazard layer, and lists every source with its date in an evidence register. It does not read the flood, sea level or climate projection tools above. Add those readings to the record yourself.

Sources

  1. FEMA — National Risk Index Data (December 2025, v1.20)
  2. FEMA — Resilience Analysis and Planning Tool (RAPT)
  3. FEMA — National Risk Index Data: Methodology and Hazards Overview (December 2025)
  4. FEMA — National Risk Index Data: Frequently Asked Questions on December 2025 Update
  5. U.S. GAO — Disaster Risk: Improvements Needed to Enhance FEMA's National Risk Index (GAO-26-107894, September 2026)
  6. FEMA — National Flood Hazard Layer
  7. FEMA — Flood Map Service Center
  8. FEMA — Glossary: Base Flood Elevation
  9. FEMA — Glossary: Freeboard
  10. NOAA National Weather Service — Precipitation Frequency Data Server (NOAA Atlas 14)
  11. NOAA National Weather Service — NOAA Atlas 15 informational page
  12. NOAA Office for Coastal Management — Sea Level Rise Viewer
  13. Sweet et al. (2022), NOAA — Global and Regional Sea Level Rise Scenarios for the United States, Technical Report NOS 01
  14. Collini et al. (2022), NOAA — Application Guide for the 2022 Sea Level Rise Technical Report
  15. California Coastal Commission — Sea Level Rise Policy Guidance
  16. California Coastal Commission — Sea Level Rise Policy Guidance: 2024 update
  17. Cal-Adapt
  18. Cal-Adapt Analytics Engine — Climate Model Simulations (WRF and LOCA2-Hybrid)
  19. U.S. Climate Resilience Toolkit — Climate Explorer
  20. NOAA National Weather Service — Heat Index
  21. NOAA National Weather Service — HeatRisk
  22. drought.gov — U.S. Drought Monitor
  23. CAL FIRE Office of the State Fire Marshal — Fire Hazard Severity Zones
  24. City of San Diego — Climate Resilient SD plan
  25. City of San Diego — Council adopts Climate Resilient SD (news release, December 14, 2021)

These tools support site review and design studies. Read each tool’s stated capabilities and limits before use.

Explore Site Dossier
Back to Research