ResearchTechnology and Digital PracticeDrones and Site Documentation

Drones for site documentation: what a landscape architect can fly, capture and claim

For landscape architects: what Part 107 allows, who controls take-off and landing, where California draws the survey line, and what it takes to state drone accuracy.

Field Method · AI-assisted research roundupPublished Sources checked

A small drone shows a whole site from above in one visit, and three separate bodies of rules decide what you may do with it. The FAA governs the flight. The land manager governs where you take off and land. In California, the Professional Land Surveyors’ Act governs what you may make and claim from the pictures. A pilot certificate and an airspace authorization settle the first; they do not settle the other two.

This article sets out what each source says, as read on November 13, 2026. It is a guide to the questions, not legal advice. Rules vary by state, agency and site, and they change.

A site visit for work is not a recreational flight

The FAA does not decide this by whether you are paid. Its page for recreational flyers gives “taking photos to help sell a property or service” as an example of a non-recreational flight, and advises: “When in doubt, assume Part 107.” Photographing a project site for a design practice is work. FAA, Recreational Flyers

That matters for a common belief about very light drones. The registration exemption for an aircraft that “weighs 0.55 pounds or less on takeoff” applies only when it is flown exclusively under the recreational exception. Flown for work, a drone under 250 grams is registered like any other, and a registered drone must meet the Remote ID rule. 14 CFR 48.15 · 14 CFR Part 89

What Part 107 asks of the flight

Part 107 covers unmanned aircraft “weighing less than 55 pounds on takeoff”. The main limits a site flight has to respect are these. 14 CFR Part 107

  • A certificated pilot. The person at the controls holds a remote pilot certificate with a small UAS rating, or flies under the direct supervision of someone who does (§ 107.12). Knowledge must be refreshed within the previous 24 calendar months (§ 107.65).
  • In sight. The crew “must be able to see the unmanned aircraft throughout the entire flight” with unaided vision (§ 107.31).
  • 400 feet. No higher than 400 feet above ground level, unless within a 400-foot radius of a structure and no more than 400 feet above its top. At least 3 statute miles of visibility (§ 107.51).
  • People and vehicles. No flight over a person unless that person is taking part, is under a covered structure or inside a stationary vehicle, or the aircraft and operation fit one of four categories. The lightest category covers aircraft of 0.55 pounds or less with no exposed rotating parts that would cut skin. Over moving vehicles, an aircraft in Categories 1 to 3 must stay within or over a closed- or restricted-access site whose occupants are on notice, or must not hold sustained flight over them (§§ 107.39, 107.110–107.145).
  • Night. Allowed with current training and anti-collision lighting visible for at least 3 statute miles (§ 107.29).
  • Controlled airspace. Class B, C and D airspace, and surface Class E around an airport, need “prior authorization from Air Traffic Control” (§ 107.41).

Two older rules of thumb no longer describe the regulation. Since April 21, 2021, night flight and some flight over people are allowed without an individual waiver when the conditions above are met. And Part 107 has no “five miles from an airport” rule; the question is the class of airspace over the site.

For that question, the FAA’s LAANC service, through approved providers, gives near-real-time authorization in controlled airspace around participating airports up to the altitude ceiling its UAS Facility Map shows for the spot, which can be lower than 400 feet. Above that ceiling, up to 400 feet, a flight needs a further coordination request, which the FAA reviews by hand and which can be filed up to 90 days ahead. LAANC authorizes the airspace only. The pilot still checks notices to airmen, weather and any flight restrictions for the day. FAA, LAANC

One rule in flux. The FAA proposed a new Part 108 for flight beyond visual line of sight on August 7, 2025. As of November 13, 2026 we found no final rule in the Federal Register and no Part 108 in the current regulations. Until one takes effect, the line-of-sight rule above governs, unless the FAA has issued a waiver of § 107.31 for the operation. Federal Register, proposed rule

Airspace is federal; the ground is not

A remote pilot certificate and an airspace authorization do not give permission to stand in a park and launch. A 2023 fact sheet from the FAA’s Chief Counsel and the Department of Transportation lists, among local laws likely to be consistent with federal authority, “Laws regulating the location of UAS takeoff and landing areas.” FAA and US DOT fact sheet

So each land manager has its own answer, and around San Diego they differ:

  • National parks. The Park Service’s manual (Reference Manual 60, Chapter 12, September 2024 update) has superintendents prohibit launching, landing or operating from park lands and waters “except as approved in writing by the superintendent.” A special use permit for a drone must be approved in writing by the Regional Director unless the manual says otherwise, and the uses it lists are tied to another permitted activity, such as filming, a special event or a right-of-way permit. Recreational use is not approved, apart from designated model aircraft airstrips. Check the park’s compendium and ask the park. NPS Reference Manual 60, Chapter 12
  • California State Parks. Drones are allowed in most units “except where prohibited by a District Superintendent’s posted order”, but State Park regulations prohibit them in wilderness areas, natural preserves and cultural preserves (Cal. Code Regs. tit. 14, § 4351). Commercial operation needs a park permit, and commercial photography or filming also needs a permit from the California Film Commission. The two San Diego Coast District orders we opened, both dated March 5, 2026, prohibit launching, landing or operating a drone. At Torrey Pines State Natural Reserve the exceptions are seasonal commercial filming whose purpose is to promote the park, permitted scientific research, and law enforcement in an emergency; we read none of them as covering site documentation for a private project. At Carlsbad State Beach the exceptions are permitted commercial filming, non-commercial use under a park special use permit, scientific research and law enforcement. California State Parks · Torrey Pines order · Carlsbad order
  • San Diego County parks. The county code allows a drone only “in an area specifically designated by the Department for that use and with written authorization”. The copy we read shows amendments through January 2023. County code, Article 2
  • City of San Diego. The municipal code’s drone division makes it a misdemeanor to fly carelessly or recklessly, against an FAA flight restriction, or in a way that interferes with law enforcement, firefighting or emergency work. It says it “is not intended to restrict” flights that comply with federal rules. We could not find the written Parks and Recreation drone policy for city parks, so we make no statement about it. Ask the department. San Diego Municipal Code, §§ 52.5401–52.5405

For a private project site, the owner’s permission to be there is the starting point. State privacy and trespass law also applies; we did not review it for this article.

When the pictures become a survey

In California, land surveying includes work by anyone who “Determines the configuration or contour of the earth’s surface, or the position of fixed objects above, on, or below the surface of the earth by applying the principles of mathematics or photogrammetry.” It also includes rendering “a statement regarding the accuracy of maps or measured survey data.” Practicing it without legal authorization, unless the person is exempt from licensure under the Act, is a misdemeanor. Professional Land Surveyors’ Act, §§ 8725, 8726, 8792

The licensing board addressed drones in a 2017 bulletin article. Planning the flight, piloting and taking the photographs are FAA matters and “are not regulated by the Professional Land Surveyors’ Act.” What the Act regulates is the product: work that shows the location or elevation of what the photographs captured, relative to the earth’s surface. The article’s examples are a topographic survey, or a boundary overlaid on an orthogonally rectified photo, provided as a finished product to a private client or public agency. It adds that someone who offers more than the flight and the photographs violates the law if the service also includes “orthogonally rectifying the photography to the surface of the Earth”, unless that work is done by, or under the responsible charge of, a person authorized to practice land surveying. Board Bulletin, Issue 50

The same Act has a provision written for this profession. Surveys made “exclusively for landscaping purposes” by a person authorized to practice landscape architecture “that do not involve the determination of any property line do not constitute surveying” (§ 8727).

How those two fit together for drone data is not settled by anything we found. The bulletin is a newsletter article from 2017, it does not mention § 8727, and we found no later board guidance. A practical reading that stays clear of the question:

  1. Photographs, video and oblique views for understanding and presenting a site are pictures. Nothing in the sources treats taking them as surveying.
  2. An orthomosaic or surface model is the kind of product the bulletin names when it is offered as a service. Whether § 8727 covers one used only inside your own landscape design work is not settled. Label it as not to scale and not a survey, never show a property line on it, and do not hand it to a client or another consultant as a base without a surveyor’s involvement.
  3. Contours, spot elevations, measured positions, anything delivered as a base for engineering, and any statement of accuracy belong with a licensed land surveyor. Under § 8731 a civil engineer licensed after January 1, 1982 needs a land surveyor’s license before practicing land surveying; the Professional Engineers Act may allow civil engineers some of this work, and we did not read it for this article. Ask the surveyor before the flight, not after: they will want to set the control.

When it matters to a project, put the question to the board in writing.

What the data can support

Positional accuracy has a published definition. The ASPRS standard, Edition 2, Version 2 (2024), reports accuracy as a root-mean-square error against independent checkpoints: surveyed points that were not used to process or calibrate the product. They should be at least twice as accurate as the product, and the checkpoint survey’s own error is now counted in the result. The standard calls for at least 30 checkpoints to test an orthoimage horizontally, and at least 30 for each vertical test; a test with fewer has to say so in its accuracy statement. ASPRS Positional Accuracy Standards (the publisher’s link asks for a sign-in; we read the same edition from a mirror copy)

Four points from the standard and its drone addendum bear on site work:

  • Overlap. Drone photogrammetry may be flown with more overlap than conventional aerial photography, up to about 80 percent forward and 60 percent side. The addendum says higher overlap is especially needed among tall buildings and in deep canyons.
  • Pixel size on the ground. Ground sample distance, the ground width of one pixel, follows from the flying height above the ground, the lens focal length and the sensor pixel size, so it changes across a site with relief. The orthomosaic’s pixel size is resampled and may differ.
  • RTK and PPK improve positions; checkpoints prove accuracy. The addendum says properly used post-processed positioning (PPK) frequently places the camera positions within about 1 to 2 centimetres horizontally and 2 to 4 vertically, and that real-time positioning (RTK) set up properly typically reaches 5 to 10 centimetres. It still strongly recommends surveyed ground control, and the standard reports accuracy only from independent checkpoints. Our reading: without checkpoints, a model’s accuracy is unknown, however sharp it looks.
  • Lidar and trees. If the ground cannot be seen through the vegetation by eye, a lidar pulse may not reach it either.

The USGS Lidar Base Specification, which sets the requirements for 3D Elevation Program airborne lidar, reflects the same limit. Vertical accuracy must be met in open, non-vegetated ground and is only reported under vegetation. The USGS may relax its thresholds where meeting them would add a substantial and prohibitive cost, which it says is often the case in heavily vegetated areas. USGS Lidar Base Specification

The ASPRS standard does not tie product accuracy to ground sample distance, pixel size or map scale. Its table of source-imagery pixel sizes for each accuracy class is a general reference for large- and medium-format metric cameras, and it says the table should not be used to state product accuracy. Pixel size does not tell you accuracy; checkpoints do. We also found no manufacturer figure for how accurate the position written into each photograph is on a drone without RTK. Treat it as unknown until tested on the project.

A short checklist before the flight

  1. Purpose. What question will the pictures answer: context, condition, a presentation view, or measurement? Measurement changes who must be involved.
  2. Pilot and aircraft. Certificate current, aircraft registered and labelled, Remote ID in order.
  3. Airspace. Class of airspace at the site, authorization if controlled, temporary restrictions on the day.
  4. Ground. Written permission from whoever manages the take-off and landing spot.
  5. People. A plan that keeps the aircraft from passing over people who are not part of the work, unless it qualifies to.
  6. Product. Decide in advance what will be delivered and how it will be labelled. If it shows positions, elevations or accuracy, involve the surveyor first.
  7. Record. Keep the date, pilot, aircraft, height and the original files, so the pictures can be traced later.

Open questions

  • Does § 8727 cover a landscape architect’s own drone orthomosaic or contours when no property line is shown, and does that change when the file is handed to a client or engineer?
  • What is the City of San Diego’s written policy for drones in its parks, beaches and open space?
  • When the beyond-line-of-sight rule is final, does it change anything for ordinary site flights?

Using the pictures in Field Method

Photo tools reads the position and, where the file records it, the compass direction of each photograph. It places the photographs on a Google Earth map, on a key view map over an aerial photograph, as State Plane points for CAD, or as cameras in Blender. It reads standard EXIF tags only, so it does not read a drone’s camera tilt, and in the Blender package each camera stands by default at an eye height above the ground. A drone camera has to be raised and tilted by hand. Drone photographs have not been tested in it yet, so review every placement, as the tool asks for every photograph.

Sources

  1. 14 CFR Part 107 — Small Unmanned Aircraft Systems
  2. 14 CFR Part 89 — Remote Identification of Unmanned Aircraft
  3. 14 CFR Part 48 — Registration and Marking Requirements for Small Unmanned Aircraft
  4. FAA — Recreational Flyers & Community-Based Organizations
  5. FAA — UAS Data Exchange (LAANC)
  6. FAA and US DOT — Updated Fact Sheet (2023) on State and Local Regulation of UAS
  7. National Park Service — Reference Manual 60, Chapter 12: Uncrewed Aircraft Systems
  8. California State Parks — Unmanned Aircraft System (Drones) in State Parks
  9. California State Parks, San Diego Coast District — Order No. 935-630-001, Torrey Pines State Natural Reserve
  10. California State Parks, San Diego Coast District — Order No. 935-612-001, Carlsbad State Beach
  11. City of San Diego — Municipal Code Chapter 5, Article 2, Division 54: Unmanned Aircraft Systems
  12. County of San Diego — Code of Regulatory Ordinances, Title 4, Division 1, Chapter 1, Article 2
  13. California Board for Professional Engineers, Land Surveyors, and Geologists — Professional Land Surveyors' Act
  14. California Board for Professional Engineers, Land Surveyors, and Geologists — Bulletin Issue 50: Unmanned Aerial Vehicles and Land Surveying Practice in California
  15. ASPRS — Positional Accuracy Standards for Digital Geospatial Data, Edition 2, Version 2 (2024)
  16. USGS — Lidar Base Specification 2025 rev. A
  17. FAA — Normalizing Unmanned Aircraft Systems Beyond Visual Line of Sight Operations (proposed rule)

These tools support site review and design studies. Read each tool’s stated capabilities and limits before use.

Explore Photo tools
Back to Research